Design and Modeling of Metamaterial-Based Antenna Arrays for Nanosatellite Communication Systems
The design and modeling of compact antenna arrays based on metamaterials for nanosatellite communication systems is presented. The main objective is to optimize performance at 2.45 GHz (S-Band). As a first step, a single coaxially fed antenna was designed on a Rogers RO4350B substrate (0.76 mm thick...
Guardado en:
| Autores principales: | , , , |
|---|---|
| Formato: | Artículo publishedVersion |
| Lenguaje: | Inglés |
| Publicado: |
FIUBA
2025
|
| Materias: | |
| Acceso en línea: | https://elektron.fi.uba.ar/elektron/article/view/217 https://repositoriouba.sisbi.uba.ar/gsdl/cgi-bin/library.cgi?a=d&c=elektron&d=217_oai |
| Aporte de: |
| Sumario: | The design and modeling of compact antenna arrays based on metamaterials for nanosatellite communication systems is presented. The main objective is to optimize performance at 2.45 GHz (S-Band). As a first step, a single coaxially fed antenna was designed on a Rogers RO4350B substrate (0.76 mm thick, εᵣ = 3.48). A unit cell with Minkowski fractal geometry was incorporated into the ground plane, and two opposite corners of the patch were truncated to induce right-hand circular polarization. Different antenna arrays were designed in 1×2 (47 × 100 mm), 1×4 (47 × 165 mm), and 2×2 (75 × 80 mm) configurations, all with the same thickness of 0.76 mm. The feeding networks were implemented using Wilkinson power dividers. These arrays enabled an increase in gain to 5.0 dBi, 7.3 dBi, and 5.9 dBi, as well as an improvement in axial ratio, while maintaining efficiencies between 79% and 87%. The useful bandwidths obtained (VSWR < 2, S₁₁ < -10 dB, axial ratio < 3 dB) were 20.7 MHz, 21.4 MHz and 31.1 MHz. The compact dimensions allow integration with the structure and subsystems onboard a CubeSat: the 1×2 and 2×2 arrays are compatible with a 1U format, while the 1×4 can be integrated into a 2U format. |
|---|